Product: # 50000-00010
Model: # WACKER AD 85 LGR
  • Twin 5 inch rear vents allow warm, dry, processed air to be vented out or ducted with optional 10 inch layflat or 5 inch sections of ductwork, to aid in drying.
  • The digital hour meter, for recording job times, comes standard with back up battery unit to ensure the meter can be read even if the unit is unplugged.
  • Electronic controls allow for convenient, quick setup and simple operation with no knobs or buttons that can be easily be damaged in transport or on the job.
  • The low temperature operation to 40 degrees F/4.4 degrees C means more moisture removal than conventional refrigerant systems at colder, yet humid conditions.
  • The AD 85LGR features a 300 CFM blower to efficiently move more humid air through the system, delivering increased air changes per hour.
  • Weight : 100 lbs
  • Air Flow : 300 cfm
  • Operational temp range : 33 to 104 F
  • Operating voltage : 115 V
  • Dehumidification rate : 85 pints per day
Product: # 50000-00020
Model: # WACKER AD 115 LGR
  • The low temperature operation to 40 degrees F/4.4 degrees C means more moisture removal than conventional refrigerant systems at colder, yet humid conditions.
  • The low temperature operation to 40 degrees F/4.4 degrees C means more moisture removal than conventional refrigerant systems at colder, yet humid conditions.
  • The digital hour meter, for recording job times, comes standard with back up battery unit to ensure the meter can be read even if the unit is unplugged.
  • Electronic controls allow for convenient, quick setup and simple operation with no knobs or buttons that can be easily be damaged in transport or on the job.
  • Twin 5 inch rear vents allow warm, dry, processed air to be vented out or ducted with optional 10 inch layflat or 5 inch sections of ductwork, to aid in drying.
  • Weight : 100 lbs
  • Air Flow : 300 cfm
  • Operational temp range : 33 to 104 F
  • Operating voltage : 115 V
  • Dehumidification rate : 125 pints per day
Product: # 44000-05000
Model: # HDR 155
  • Pneumatic tires and single point lift bail for easy transport, along with rugged rotomolded plastic fuel tank with 15 hour run time, make these heaters jobsite friendly.
  • An active air cooling system keeps the rear of the machine significantly cooler than competitive models without the need for refractory panels.
  • Best in class 155,000 BTU/hr to maximize your heat output with an operating range of -25 ?C to 45 ?C.
  • Front panel made from 300 series stainless steel for extreme performance and longevity.
  • Operating weight : 280 lbs
  • BTU per hour : 155,000
  • Runtime : 15.5 hours
  • Fuel capacity : 17.2 gal
  • Fuel type : diesel
Product: # 44000-05010
Model: # HI 110
  • Low temperature rating to -20 degrees C on standard model; -30 degrees C on Heavy Duty (HD) models.
  • Available in Standard or Heavy Duty (HD) models.
  • Heavy Duty model includes robust structural support including under heater cross support and 4 point lifting brackets.
  • Control panel on the heater offers convenient side outlet for attaching remote thermostat for maintaining ideal temperature range.
  • Accessories include remote thermostat, ductwork, L-vent pipe and rain cap.
  • Operating weight : 270 lbs
  • Diameter flue : 6 inches
  • BTU per hour : 112,141 hour
  • Operating temperature : 162 degrees
  • Fuel type : diesel
  • Fuel capacity : 17.2 gal
Product: # 44000-05030
Model: # HI 200
  • Accessories include remote thermostat, ductwork, L-vent pipe and rain cap.
  • Control panel on the heater offers convenient side outlet for attaching remote thermostat for maintaining ideal temperature range.
  • Heavy Duty model includes robust structural support including under heater cross support and 4 point lifting brackets.
  • Low temperature rating to -20 degrees C on standard model; -40 degrees C on Heavy Duty (HD) model.
  • Available in Standard or Heavy Duty (HD) models.
  • Operating weight : 385 lbs
  • Diameter Flue : 6 inches
  • BTU per hour : 205,410
  • Runtime : 18.7 hours
  • Fuel Capacity : 27.74 gal
  • Fuel type : diesel
Product: # 44000-05050
Model: # HI 300D
  • Accessories include remote thermostat, ductwork, L-vent pipe and rain cap.
  • Heavy Duty model includes robust structural support including under heater cross support, lifting bail and fork pockets.
  • Low temperature rating to -20 degrees C on standard model; -30 degrees C on Heavy Duty (HD) models.
  • Available in Standard model with 16" supply or Heavy Duty (HD) model with a 2 x 12" supply.
  • Control panel on the heater offers convenient side outlet for attaching remote thermostat for maintaining ideal temperature range.
  • Operating weight : 550 lbs
  • BTU per hour : 296,982
  • Diameter Flue : 6 inch
  • Runtime : 16.8 hours
  • Fuel Capacity : 35.6 gal
  • Fuel Type : diesel
Product: # 44000-05070
Model: # WACKER HI 400HD D
  • Adjustable ball valve on Natural Gas/Propane model allows flexibility to switch from Natural Gas to Propane with ease and includes safety locking device to keep valve from moving once set.
  • Diesel model features 2 stage burner with low-fire setting for fuel savings during low heat demand, allowing 30 hours of continuous run time on a single tank of fuel.
  • Burner head and gas pipe assembly are made from 100% stainless steel for long life.
  • The HI 400HD comes standard with -40 degree F/C cold weather kit and robust design that features lifting bail, fork pockets and adjustable handle.
  • Operating weight : 860 lbs
  • BTU per hour : 404,569
  • Diameter Flue : 6 inch
  • Runtime : 19.2 hours
  • Fuel Capacity : 57.1 gal
  • Fuel Type : diesel
Product: # 44000-05150
Model: # HI 770XHD
  • Side access door provides superior performance in windy conditions and is lockable for added security. Heavy duty fork pockets designed for easy load and unload for greater jobsite mobility.
  • Optional Combustible Gas Detection System is offered for improved jobsite safety in potentially volatile environments, shutting down the heater in the presence of hydrocarbon vapors.
  • Unique Recircul-Air design allows adjustable recirculation of warm inside air, resulting in huge fuel savings and even temperatures.
  • The durable heat exchanger is made from 100% 309 stainless steel and comes standard with a 5-year warranty.
  • The DURA-GEN extended run technology offered on the HI 770XHD, minimizes oil changes to every 3000 hours (125 days).
  • Operating weight : 7,543 lbs
  • Diameter Flue : 9 inches
  • BTU per hour : 770,000
  • Heat Efficiency : 75 %
  • Runtime : 40 hours
  • Fuel Capacity : 235.5 gal
  • Fuel Type : diesel
Product: # 44000-05200
Model: # HI 900
  • Industry leading for heat delivery in its class, boasting up to 878,000 Btu/hr and up to 6,450 cubic feet per minute, the HI 900 also features a static pressure gauge, helping maximize heat delivery a
  • Designed for maximum mobility with integrated forklift pockets and a single lift point, the HI 900 is able to fit through a 36" door opening.
  • Indirect fired air heaters produce clean, dry, healthy heat offering an ideal environment for a variety of construction, residential and restoration applications without the use of an open flame, comb
  • The unique Recircul-Air design allows adjustable recirculation of warm inside air, while pressurizing with fresh air, resulting in fuel savings and even temperatures.
  • Operating weight : 3,400 lbs
  • BTU per hour : 878,000
  • Diameter Flue : 20 inch
  • Capacity - Drying Volume : 432,230 cu ft
  • Heating efficiency : 83 %
  • Air Flow : 6,447 cfm
  • Runtime : 16.9 hours
  • Fuel Capacity : 103 gal
  • Fuel Type : diesel
x